PaintShield 2810 Peelable Protective Coating: Liquid Masking for Rental and Construction Equipment

 

PaintShield 2810: Peelable Coating,Stripable Liquid Masking

Product

 Equipment Protective Peelable Coating ,Equipment Protection Liquid Masking Tape, Equipment Protective Film

PaintShield 2810: Peelable Coating,Liquid Temporary Protective Coating Masking,

PaintShield_2810

Water based peelable protective Masking for Rental and Construction Equipment.  Protection from ...Cement, Mortar & Paint Splashes.                           This economic Peelable coating is also used within the building industry for scratch and stain protection.
Color: White when wet. Clear when dry. Flashpoint: None

 

PaintShield 2810 Peelable Protective Coating: Peelable Masking

Customer Comments:

  Virtually eliminates repairs and reduces cleanup costs during rental period, construction and renovation. The protective coating is removed in one piece, revealing a clean showroom condition!  The total cost per gallon of peelable coating averages $35.00, to protect thousands of dollars’ worth of equipment!   PaintShield is a water based protective strippable mask coating for rental lifts and other rental and construction equipment.  It dries to form a durable temporary protective strippable protective masking that protects from damage during the rental, construction and paint over spray.   Simply Paint On & Peel Off:  

 

PaintShield 2810 Peelable Coating: Peelable Masking

Benefits To You:

 

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Cost effective solution to protect surfaces from damage and time consuming cleanups

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Virtually eliminates repairs caused during Storage, Shipping and Transport

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Provides Temporary protection through final inspection

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Replaces crude or ineffective liner materials

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Value added service for Buyer's satisfaction

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

professional image for equipment suppliers

  According to industry data, 70% of used rental equipment surfaces are damaged and splattered with paint and construction material, resulting in staining, scratching and hours of cleanup. With the use of PaintShield, once the equipment is returned and the final cleanup is scheduled, the protective coating is peeled away in one piece removing all contamination and debris, revealing a lifts, elevators and other equipment in showroom condition!   PaintShield Protective Peelable coating protects equipment surfaces and reduces cleanup costs. Paint overspray is removed with the PaintShield protective masking eliminating the use of harsh flammable solvents to remove the overspray. Many of these solvents can dull and remove the original equipment surface coating.  

 

 

  PaintShield protects door and window glass and frames against scratches, abrasions and job site dirt and grime. PaintShield is easy-to-apply, the water-based coating air-cures within 12-24 hours to form a durable, easy-to-remove "Protective Masking." One gallon covers approximately 200 Sq Ft. PaintShield is a protective strippable coating engineered for use on a wide variety of non-porous surfaces. Typical applications include: Surface protection from damage, scratches, chipping and from exterior and interior environments. Depending on the thickness of the wet film, dry film thickness can range from one to ten mils. Thin films are clear while thicker films are translucent. The application of PaintShield coatings will protect surfaces from paint overspray or damage during manufacturing and shipping. PaintShield represents the ultimate in non-solvent, water borne, strippable coatings. PaintShield does not contain VOCs.

 

Peelable Coating: Peelable Masking, ship restoration image.

 

PaintShield 2810: Peelable Coating, ship restoration image II.

 

  Ship building, construction and restoration masking application, pictured above.

Peelable Coatings: UV Test image-I

Performance Tests :

  Peelable Coating, Liquid Masking UV Test image IPeelable Coating UV Testing image II, Peelable Maskings 

UV Exposure Study: The two sets of pictures represent the equivalent to 6 months and 12 months exposure to UV light using a controlled irradiance water cooled XENON ARC apparatus and run to SAE J1960 ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS.   Three sets of coatings were tested:
1) PaintShield 2810 - as is (on the left)
2) PaintShield 2810- with UV adds (middle)   OVERALL all sets exposed quite well and the test resulted in good integrity.  2810UV was almost perfect after the 6 month test and much better than the other two after the 12 month conditions. Peeling of the two PaintShield was very easy.   Gallon samples are available for purchase in order to perform a small test first. It is difficult to determine the effectiveness for each type of substrate, such as acrylic, metal and coated surfaces.  A gallon sample will help to determine effectiveness, coverage, and the approximate amount of time required for it to work.  

 

Peelable Coating: Application recommendations.

Application:

  PaintShield is water based, eco-friendly and Green: a protective peelable liquid that air-dries into a temporary protective masking. PaintShield can be easily applied by air or airless spray, roller, or brushing.  Brushes can be cleaned with soap and water. PaintShield peelable mask is used as received; Apply product evenly to produce a dry film thickness of approximately 7-10 mils or wet film thickness of 14 to 20 mils.. Drying time is dependent on temperature.  At 70F, product will dry to the touch in 30-60 minutes and air-cure in approximately 24 hours. You can enhance drying time by air movement and other suitable means.

Renovation: Apply to glass that is to remain 'in situ', to give excellent protection during the course of building alteration.   PaintShield strippable coating should be applied in two or more thin coats, allow 30- minutes of air dry time between the first and second coat, which helps control necessary film thickness to facilitate uniform protection and removal.  Spray method can cause feathered edges which can make the peelable coating film difficult to remove. The use masking tape to frame edges will make removal easier and faster.

Application Guidelines:  

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Apply a minimum of two thin-uniform coats; allow 30- minutes of air dry time between the first and second coat, which helps control necessary film thickness to facilitate uniform protection and removal. 

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Do not apply the product: in rain or when the temperature is below 40F ( 3C)

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Do not remove the product: until fully air-cured, allow 12-24 hours after Peelable Coating application, depending upon; humidity, temperature and airflow. Product can remain in situ, on a surface for up to 12 months. Dry Removal: Simply peel off dry, from one corner. For wet removal: utilize a manual pressure washer to rinse off with 1500-3000psi pressure and water.

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

If the product is to be applied to framework, aluminum or PVC, allow coating to air dry to touch, usually 30-45 minutes, then apply a second coat; do not coat handles or locking mechanisms.          Do not coat where there is likelihood a vent/door may be opened.

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Do not store the product where it may freeze.

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Ideally, apply towards the end of a working day and let air cure overnight.

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

When trained, an applicator should, dependent on site conditions, be able to cover between 270– 540 Sq. Ft (25-50m2) per hour.

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Immediately Wash out rollers and all other equipment with clean water after use.

 

Application Guidelines: (Continued) 

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Any unused volume of liquid product left in the roller tray may be returned to the storage container providing it has not begun to skin or set.

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Ensure all opened containers are resealed when not in use and during transportation.

Description: Temporary Protective Coatings, Strippable Coatings, Peelable coatings,Liquid Masking Compounds

Shelf life is normally 12 months in a properly sealed container, when not in use.

One liter of Peelable coating applied with the roller will cover 65-86 sq Ft (6-8m2) of glazing.

Peelable Coating Removal

Removal:

 Dry Removal: Simply peel off dry, from one corner. For wet removal: utilize a manual pressure washer to rinse off with 1500-3000psi pressure and water.

Peelable Coating Safety & Handling: Peelable Coating: Peelable Masking Use recommendations:

Safety & Handling:

  Avoid breathing vapors/mists that occur during spraying – wear a painter’s mask or other suitable respiratory device when applying this product. Avoid skin and eye contact. Do not allow product to freeze. Keep container closed when not in use. Store in a clean dry area with a minimum temperature of 50F.  

PaintShield 2810: Peelable Coating is Non-Flammable Peel Coating.

Flammability:

  Water Resistant PaintShield presents no fire hazard as received, during or after application. PaintShield 2810 is non-flammable in liquid or dry state.  

PaintShield 2810 Peelable Coating: dispose of like water base acrylic/latex paint coatings.

Disposal:

PaintShield Protective Peelable coating is disposed of similar to water base acrylic/latex paints.  

PaintShield Peelable Coating Packaging

Packaging:

PaintShield 2810 is available in 1gallon, 5 gallon, 55 gallon & 110 gal/220 gal disposable tote tanks. Totes feature an inner bladder that collapses as product is dispensed, ensuring that all product is usable over the life of the container in service.   Also available in different colors at additional costs.  

 

PaintShield 2810 Peelable Coating: Operating Guidlines.

Operating Guidelines:

  1. When applying, use the same protection as used while applying a water base Acrylic/latex paint.

   First Time Application: Pre-clean surfaces to be coated,  clean application equipment immediately after use with water.  

PaintShield 2810 Peelable Protective Masking: Testimonial.

Testimonial:
"We used some of your PaintShield 2810, and the stuff works great! It sprayed on cloudy, but when it air cured it was clear. It surprised us all. I'll recommend this stuff to any rental outfit or painter." Ian M. Young , Premier Platforms, Inc.